DNA Motoring 2pcs Tool Boxes Set
Our DNA Motoring 2pcs Tool Boxes Set delivers professional-grade truck bed organization with two aluminum storage boxes designed to maximize cargo space without sacrificing security. The underbody and crossover box combination provides versatile storage for tools, equipment, and gear while maintaining full bed access.
We engineered this set with heavy-duty aluminum construction and reinforced corners to withstand harsh road conditions and weather exposure. Lockable stainless steel latches protect your valuables, while integrated gas struts ensure smooth, controlled lid operation on both boxes.
Specifications & construction details
Aluminum Construction & Weather Protection
We built the DNA Motoring 2pcs tool boxes set using marine-grade aluminum alloy that resists rust and corrosion even in salt-heavy coastal environments. The diamond plate texture provides slip resistance and adds structural rigidity to prevent warping under load.
Each box features fully welded seams rather than riveted joints, creating a stronger seal against water intrusion. The rubber gasket perimeter compresses when the lid closes, forming a weather-tight barrier that keeps moisture, dust, and insects away from stored items.
Two-Box Storage Configuration
Crossover Box Design
The crossover box mounts behind the truck cab, spanning the full bed width to store long-handled tools, fishing rods, and lumber. We designed this top box with a 16-inch interior depth and reinforced bottom panel that supports up to 150 pounds of evenly distributed weight.
Underbody Box Design
The underbody toolbox installs beneath the truck bed or along the side rail, reclaiming wasted space for smaller tools and equipment. This lower box features a 12-inch depth ideal for power tools, jumper cables, and recovery straps. The sloped front edge maintains ground clearance while maximizing internal volume.
Locking System & Security Features
We equipped each box with commercial-grade stainless steel T-handle latches that resist prying and forced entry. The rotating T-handle design requires less effort to operate than paddle latches, especially when wearing work gloves or in cold weather.
The key cylinder accepts standard tubular keys and includes two sets with each DNA Motoring 2pcs tool boxes set. Both boxes can be keyed alike for convenience, or you can request separate keys for additional security when multiple people access your truck.
More Truck Bed Storage Solutions
Rated 4.8 by verified buyers
Tool Box Set Questions
Our universal mounting system fits most full-size pickups including Ford F-150/F-250, Chevy Silverado, GMC Sierra, Ram 1500/2500, Toyota Tundra, and Nissan Titan. The crossover box requires a minimum bed width of 60 inches and 18 inches of clearance from the cab bulkhead.
The underbody box needs 48 inches of continuous rail length for proper bracket placement. Measure your specific truck bed dimensions before ordering, especially if you have aftermarket bed accessories or a short-bed configuration.
Wash both boxes with automotive soap and water every few months to remove road salt and debris that can dull the finish. We recommend applying a silicone-based protectant to the rubber gaskets annually to maintain flexibility and sealing performance.
Lubricate the T-handle lock cylinders with graphite powder rather than oil-based products, which attract dust. The stainless steel latches require minimal maintenance but benefit from occasional cleaning with a damp cloth to remove grime buildup. Avoid pressure washing directly at the seams, as excessive force can compromise the weather seal.
The DNA Motoring 2pcs tool boxes set comes with two boxes keyed alike to each other, but they use a different key pattern than your vehicle’s ignition. We cannot rekey the locks to match your truck key due to the different cylinder designs.
Both boxes accept standard tubular key cylinders, so a locksmith can potentially replace the factory cylinders with ones keyed to your preference. Each set includes four keys total—two for regular use and two spares you can store separately or share with family members who access your truck.
The crossover box supports up to 200 pounds of evenly distributed weight, while the underbody box is rated for 125 pounds maximum load. These ratings assume proper installation with all mounting brackets secured according to the included instructions.
Exceeding these weight limits can cause the lid hinges to sag or the bottom panel to warp. Distribute heavy items evenly across the box floor rather than concentrating weight in one corner. The reinforced construction in both boxes handles typical tool loads well, including heavy items like air compressors, welding equipment, and battery packs.
Both boxes feature continuous rubber gaskets that compress when the lid closes, creating a weather-tight seal rated for rain, dust, and moisture protection. We’ve tested the seal integrity with pressure washing and submersion tests, confirming the gaskets prevent water intrusion under normal use conditions.
However, no truck toolbox is completely waterproof if subjected to extreme conditions like prolonged submersion or hurricane-force rain at highway speeds. The DNA Motoring 2pcs tool boxes set protects contents during typical weather exposure including rainstorms, snow, and muddy conditions. Inspect the gaskets annually and replace them if you notice cracking or permanent compression.
Most truck owners complete installation with basic hand tools in 60-90 minutes without professional assistance. The kit includes all mounting hardware, brackets, and detailed instructions with truck-specific diagrams for common models.
You’ll need a socket set, wrenches, and possibly a drill with metal bits if you choose frame-mounting for the underbody box. The crossover box uses clamp-style rail brackets that require no drilling through your bed. If you’re uncomfortable working under your truck or don’t have jack stands for safe undercarriage access, consider having a mechanic or automotive shop handle the underbody box installation.
The crossover box measures approximately 60 inches wide × 18 inches deep × 16 inches tall internally, providing room for long-handled tools, levels, and conduit. The underbody box interior dimensions are approximately 48 inches wide × 18 inches deep × 12 inches tall, ideal for power tools, hand tool sets, and equipment cases.
Both boxes feature flat bottom panels without internal obstructions, allowing you to add custom dividers or foam organizers. The lids open to a full vertical position and hold steady with integrated gas struts, giving you unobstructed access to contents. Measure your largest tools before ordering to confirm they’ll fit the interior dimensions of the DNA Motoring 2pcs tool boxes set.