DNA Motoring High-Flow Performance Air Filter
Engineered for enthusiasts who demand more from their engine, our DNA Motoring air filter delivers measurable gains in horsepower and throttle response. The advanced multi-layer cotton gauze filtration media captures contaminants down to 5 microns while maximizing airflow to your intake system.
Unlike disposable paper filters, this washable design is built for long-term performance. Installation takes just minutes with no modifications required, and the precision-fit construction ensures a perfect seal against unfiltered air. Whether you’re daily driving or pushing your vehicle at the track, this filter provides the protection and performance your engine deserves.
Performance specs & filtration technology
Advanced Filtration Technology & Construction
Our DNA Motoring air filter uses a progressive layering system that sets it apart from conventional designs. The outer cotton gauze layers trap larger debris while inner micro-fibers capture fine dust and contaminants. This multi-stage approach maintains filtration efficiency even as airflow increases during acceleration.
The polyurethane frame resists warping under extreme temperatures, ensuring consistent filter geometry throughout its service life. Each filter undergoes oil treatment using our proprietary formula that enhances dust-holding capacity without restricting airflow. The precision-molded rubber gasket creates an airtight seal against your airbox or intake tube, preventing unmetered air from entering the engine.
Installation & Compatibility Guide
This universal-fit filter works with most aftermarket cold air intakes and short ram intake systems using standard 3-inch to 4-inch diameter mounting points. Before installation, verify your intake tube diameter and check that you have at least 8 inches of clearance in all directions for proper airflow.
Installation requires no special tools—simply remove your existing filter, check the mounting surface for debris, and secure the DNA Motoring air filter using the included hose clamp or your intake’s factory mounting hardware. The pre-oiled design means you can drive immediately after installation.
Maintenance & Cleaning Instructions
Proper maintenance extends filter life and preserves performance gains. Inspect your dna motoring air filter every 10,000 miles under normal driving conditions, or every 5,000 miles in dusty environments. When the cotton gauze appears darkened or you notice reduced throttle response, it’s time for cleaning.
Use a dedicated air filter cleaner spray to saturate the filter element, let it soak for 10 minutes, then rinse from the clean side outward with low-pressure water. Never use compressed air, petroleum-based solvents, or high-pressure washers—these damage the cotton fibers. Allow the filter to air-dry completely before re-oiling.
Complete Your Engine Upgrade
Rated 4.8 by verified buyers
Common Questions About DNA Motoring Air Filters
Under normal driving conditions, plan to clean your filter every 10,000 miles. If you drive frequently in dusty, off-road, or construction areas, inspect the filter every 5,000 miles and clean when the cotton gauze appears significantly darkened.
Reduced throttle response or a noticeable drop in fuel economy can also indicate it’s time for cleaning, even if you haven’t reached the mileage interval.
This universal-fit design works with most aftermarket intake systems using 3-4 inch diameter mounting points. For factory airboxes, you’ll need to measure your OEM filter’s dimensions and compare against our sizing specifications.
Many stock airboxes use proprietary shapes that may not accommodate universal filters. If your factory filter has a flat panel design or unique mounting tabs, consider our vehicle-specific filter options instead.
Yes, the DNA Motoring air filter is fully compatible with turbocharged and supercharged applications. The high-flow design is especially beneficial for forced induction engines, where reduced intake restriction improves turbo response and boost pressure.
Many customers with turbocharged vehicles report faster spool times and reduced turbo lag after installation. The filter’s heat-resistant construction also handles the higher under-hood temperatures common in boosted engines.
Use only dedicated air filter cleaning solutions designed for oiled cotton gauze filters. We recommend DNA Motoring’s own cleaning kit, though compatible products from other performance filter manufacturers work as well.
Never use dish soap, laundry detergent, gasoline, or brake cleaner—these damage the cotton fibers and strip the essential oils that trap fine particles. After cleaning and drying, reapply air filter oil before reinstalling.
Dyno testing shows gains of 5-12 horsepower on naturally aspirated engines and up to 18 horsepower on turbocharged or supercharged applications. Actual gains depend on your engine’s baseline restriction, displacement, and whether you’ve made other performance modifications.
Power increases are most noticeable at higher RPMs where airflow restriction becomes the limiting factor. You’ll also experience improved throttle response across the entire RPM range.
No tuning is required for most applications. Modern engines with mass airflow sensors automatically adjust fuel delivery to match the increased airflow. Your ECU will adapt within a few drive cycles to optimize the air/fuel ratio.
For heavily modified engines or those using speed-density tuning systems, you may benefit from a professional tune to maximize the performance gains from reduced intake restriction.
Our lifetime limited warranty covers manufacturing defects in the cotton gauze media, polyurethane frame, and rubber mounting gasket for as long as you own the filter. This includes tears, delamination, or frame warping that occurs under normal use.
The warranty requires proper maintenance using approved cleaning methods. Physical damage from installation errors, chemical damage from unauthorized solvents, and degradation from lack of maintenance are not covered.