DNA Motoring BEDC-F-005 Front Bumper Cover (1988-1998)
Our DNA Motoring BEDC-F-005 front bumper cover is engineered for 1988-1998 Chevrolet and GMC C/K series full-size trucks and SUVs, delivering factory-style fitment and OEM-grade construction at a fraction of dealership prices. Precision-molded from impact-resistant ABS thermoplastic, the BEDC-F-005 arrives primed and ready for your choice of finish, making restoration or customization straightforward for DIY builders and body shops alike.
We designed this replacement bumper cover to meet or exceed original equipment specifications, with pre-drilled mounting holes and factory contours that eliminate guesswork during installation. Whether you’re repairing collision damage, refreshing a weathered front end, or upgrading for a cleaner aesthetic, the dna motoring bedc f 005 front 88 98 provides the durability and fit you need to complete your project with confidence.
Fitment & Construction Details
ABS Construction & Surface Preparation
We manufacture the DNA Motoring BEDC-F-005 from acrylonitrile butadiene styrene (ABS), the same thermoplastic used by major automotive OEMs for lightweight yet impact-resistant bumper covers. This material choice delivers superior resistance to road debris, temperature fluctuations, and UV exposure compared to cheaper polypropylene alternatives, ensuring your front end maintains its integrity through harsh weather and daily driving.
The dna motoring bedc f 005 front 88 98 arrives with a factory-applied primer coat that promotes optimal paint adhesion. Before finishing, we recommend light sanding with 320-grit sandpaper followed by a high-build automotive primer for professional results. The primed surface accepts urethane-based paints, allowing you to match your truck’s existing color with standard automotive refinishing techniques.
Fitment Specifications for 1988-1998 Models
This front bumper cover fits the following Chevrolet and GMC full-size truck and SUV models produced between 1988 and 1998: C1500, C2500, C3500, K1500, K2500, K3500 pickups, as well as Suburban, Blazer, and Yukon SUVs equipped with the standard chrome front bumper assembly. The BEDC-F-005 is engineered specifically for trucks with the factory single-piece front bumper design, not the composite split-bumper style introduced on later refresh models.
Pre-drilled mounting holes align with factory bracket locations on both two-wheel-drive (C-series) and four-wheel-drive (K-series) chassis configurations. The cover accommodates standard fog lamp cutouts and tow hook openings where applicable, maintaining functional access to factory equipment. Before ordering, verify your truck’s bumper style matches the single-piece factory design by checking the existing cover’s mounting points and overall contour.
Painting & Finishing Recommendations
For seamless color matching, professional body shops should wet-sand the primed surface with 400-600 grit sandpaper, apply a high-build urethane primer, then finish with three coats of color-matched base coat followed by two coats of automotive clear coat. The dna motoring bedc f 005 front 88 98 accepts all standard automotive paint systems, including single-stage enamels, base coat/clear coat systems, and water-based formulations.
DIY painters can achieve excellent results using aerosol automotive primers and paints specifically formulated for flexible plastics, available at most auto parts retailers. We recommend applying a flex additive to the paint system (typically 25-50% by volume) to maintain the ABS cover’s natural give without cracking the finish during minor impacts or thermal expansion.
Shop Compatible Exterior Upgrades
Rated 4.8 by verified buyers
Common Questions About the BEDC-F-005 Front Bumper Cover
Yes, the DNA Motoring BEDC-F-005 is designed specifically for 1988-1998 GMC Sierra and Chevrolet Silverado C/K series trucks, including four-wheel-drive K1500 models. The cover includes pre-molded fog lamp cutouts that accept factory fog light housings without modification. Verify your truck has the single-piece bumper design (not the split composite style) before ordering to ensure proper fitment.
The dna motoring bedc f 005 front 88 98 arrives with a factory-applied primer coat ready for paint. You’ll need to apply color-matched automotive paint and clear coat to match your truck’s finish. Most body shops can color-match and paint the cover for $150-$300 depending on your location, or you can use aerosol automotive paints designed for plastic bumpers if you prefer a DIY approach. We recommend light sanding and a high-build primer before applying your color coat.
Installation requires basic hand tools: a socket set with 7mm, 10mm, and 13mm sockets, a Phillips screwdriver, and a flathead screwdriver or trim removal tool for push-pin fasteners. The included hardware kit contains all mounting clips and screws needed for installation. Most DIY installers complete the job in 60-90 minutes working alone. No welding, drilling, or modification of the bumper frame is required—the cover uses existing factory mounting points.
Yes, this bumper cover meets CAPA (Certified Automotive Parts Association) standards for aftermarket collision replacement parts. Many insurance companies accept CAPA-certified parts for collision repairs as equivalent to OEM components. If your insurance adjuster requires documentation, contact our customer service team for certification paperwork. Professional body shops regularly use our CAPA-certified covers for insurance claim work.
The BEDC-F-005 is engineered to fit factory-style bumper reinforcement bars and most aftermarket chrome bumpers that maintain OEM mounting dimensions. The cover’s mounting points align with standard bracket locations found on both original and replacement bumper bars. If you’ve installed a heavy-duty aftermarket bumper with modified mounting points or extended length, verify dimensional compatibility before ordering. The cover’s flexibility allows minor adjustments during installation.
ABS thermoplastic offers excellent impact resistance and UV stability comparable to or exceeding original equipment materials. The dna motoring bedc f 005 front 88 98 uses the same grade of ABS employed by major automotive manufacturers for bumper covers, with superior resistance to cracking from temperature extremes compared to cheaper polypropylene alternatives. With proper paint protection, the cover will maintain its integrity through years of daily driving and exposure to road debris.
We accept returns on uninstalled, unpainted covers within 30 days of purchase with original packaging intact. Since the BEDC-F-005 is a primed part ready for finishing, any attempt to paint or install the cover voids return eligibility. We strongly recommend test-fitting the cover before painting to verify proper alignment with your truck’s mounting points. Contact our customer service team before initiating a return to receive authorization and shipping instructions.